What is drive-in racking
In drive-in racking, forklifts enter the rack and place pallets on continuous rails, several pallets deep. There are almost no aisles, so the same floor area holds far more pallets than selective racking. A drive-through version opens at both ends.
Where it works best
- Large quantities of a small number of products
- Stock with the same batch or expiry date, such as beverages, packaged food or paint
- Cold rooms, where floor space is expensive to cool
- Seasonal build-up stock
How it stores
Drive-in racking normally works on last in, first out (LIFO), because the pallet placed last is nearest the entrance. Drive-through racking, with access at both ends, can work on first in, first out (FIFO). Choose based on how your stock is dated and picked.
Typical specifications
| Item | Typical range |
|---|---|
| Lane depth | 2 to 10 pallets, as the site and forklift allow |
| Pallet weight | 1,000 to 1,500 kg |
| Height | 3 m to 10 m |
| Lane width | Pallet width plus clearance on both sides for the forklift |
| Support | Continuous rails or arms that carry the pallet edges |
Limits to plan for
Forklift drivers must be trained, because they operate inside the rack structure. Pallets need to be in sound condition and of one size. Selectivity is low, since you cannot reach a single pallet in the middle of a lane without moving others. Uprights need impact protection.
Frequently asked questions
How much space can I save?
It depends on your layout, but removing most aisles typically allows notably more pallet positions in the same area. Send us your floor plan and we will estimate.
Can it be installed in a cold room?
Yes. Galvanised or suitably finished steel is recommended for humid, cold conditions.
