Racking manufacturer · Delivery across India

Pallet rack specifications explained: uprights, beams, bracing and load capacity

Understand pallet rack specifications: upright sections, beam types, bracing, base plates and load capacity tables. Learn how to read a quotation and what to ask your supplier.

By RackForge Storage Systems · 21 September 2026 · 3 min read

A pallet rack quotation is full of terms such as frame, beam pair, UDL and level pitch. Here is what each means, so you can compare offers with confidence.

The frame

An upright frame is two vertical columns joined by horizontal and diagonal braces. Columns are roll-formed steel sections with rows of slots (teardrop or keyhole shaped) at regular spacing. Beam connectors hook into these slots.

Three things define the frame:

  • Column section and thickness. Larger, thicker columns carry more load and resist bending.
  • Frame depth. The distance between the two columns, usually matched to the pallet depth. A deeper frame is more stable.
  • Bracing pattern. More diagonals make the frame stiffer, which matters more as height increases.

The beams

Beams carry the pallets. Two types are common:

Beam typeFeatures
Box beamClosed rectangular section, strong in bending and twisting, a common choice for heavy loads.
Step beamOpen section with a step for supporting decking or pallets, often used where wire mesh or panels are fitted.

Each level uses a beam pair, one at the front and one at the back of the bay. Capacity is normally stated per pair, and usually assumes the load is evenly shared.

Load capacity

Every rack has two kinds of capacity:

  • Beam capacity per level: how much weight the two beams can carry at that span.
  • Frame capacity: how much total weight the upright frame can carry down to the floor.

A rack fails at whichever limit is exceeded first. The frame limit falls as the distance between beam levels grows, and as the height to the top level increases. That is why a rack with wide level spacing may carry less in total than a rack with closer levels, even though the columns are identical.

Level pitch and clearance

Level pitch is the vertical distance from one beam to the next. Calculate it as the stacked pallet height plus the beam height plus clearance. A working clearance of about 100 to 150 mm above the load lets the forklift place and lift pallets safely.

Base plates and anchoring

Base plates spread the column load and take anchor bolts. Anchoring is essential for tall racks, for racks in seismic areas and for any rack in a forklift aisle. Fix the racks only to floors of adequate thickness and strength.

Safety accessories

  • Beam safety pins prevent beams lifting out.
  • Row spacers hold back-to-back rows together.
  • Column guards and end-of-aisle protectors reduce damage.
  • Decking (wire mesh or panels) supports non-standard pallets and carton loads, and improves fire safety when used with sprinklers.

How to read a quotation

Check that it lists: column section and thickness, beam section and thickness, beam length, number of levels, capacity per level, base plates and anchor bolts, safety pins, finish and quantity of each item. A quote that only states "heavy duty rack" gives you nothing to compare.

To see typical ranges, visit our pallet racks page.

Need a rack designed for your space?

Send us your area, what you store and the weight per pallet or shelf. We will suggest a system and quote.

Get a quote