Racking manufacturer · Delivery across India

Steel thickness and finishes for racks: powder coating, galvanising and what matters

Learn how steel thickness, powder coating and galvanising affect rack strength, life and cost. Understand pre-treatment, coating thickness and how to choose for your environment.

By RackForge Storage Systems · 21 September 2026 · 3 min read

Two racks that look the same can differ greatly in strength and life. Steel thickness and finish are the main reasons.

Steel thickness

Thicker steel resists bending and buckling better, so it carries more load. Typical thickness in racking:

ComponentTypical thickness
Display rack shelves0.6 to 1.0 mm
Slotted angles1.5 to 3.0 mm
Pallet rack uprights1.8 to 3.0 mm
Pallet rack beams1.6 to 3.0 mm
Mezzanine plates and sections3 mm and above

Thickness is only part of the story. Section shape, stiffening ribs and length also matter. Always compare thickness and stated capacity for the same configuration.

Powder coating

Powder coating is the standard finish for indoor racks. Dry powder is sprayed onto the steel and then baked to form a hard, even skin. A good coating depends on preparation:

  1. Degreasing and rust removal. Oil and scale must go first.
  2. Pre-treatment. A phosphate or similar conversion coat helps the powder to grip and resists rust.
  3. Coating. Applied evenly, often in the range of about 60 to 80 microns.
  4. Curing. Baked at the right temperature and time.

Powder coating gives good colour choice, a clean look and reasonable protection in dry indoor conditions.

Galvanising

Galvanising coats steel with zinc. It protects even where the surface is scratched, and lasts longer in damp, coastal, outdoor and cold-storage environments. It costs more than powder coating and gives a metallic finish. Pre-galvanised sheet and hot-dip galvanising are different processes, so ask which is offered.

Choosing a finish

EnvironmentSuggested finish
Dry indoor warehouse or shopPowder coating
Humid, coastal or chemically activeGalvanised, or a higher-grade coating
Outdoor yardHot-dip galvanised, with roof if possible
Cold roomGalvanised or suitable coated steel

What to ask your supplier

  • What is the steel thickness of each part?
  • What pre-treatment is used before painting?
  • What coating thickness do you aim for?
  • Is galvanising available, and which type?

More in the buyer's guide to warehouse racking.

Need a rack designed for your space?

Send us your area, what you store and the weight per pallet or shelf. We will suggest a system and quote.

Get a quote